|
|
|
117-Safari Mirrors
Mirror for your Jeep. Replaces O.E.M. Jeep Mirror when removing hard doors. Save yourself from a traffic violation for less then the cost of the ticket. Olympics' Safari mirrors easily bolt into the Windshield's door hinge pivot or mounting position in Safari doors in minutes. Clean streamlined mirror arms have fastening hardware above and below the threaded shaft for a solid install and minimal vibration.
Mirror size 9.5“X 6“.
Sold in pairs. Comes in your choice of polished stainless steel or texture black.
117-122 Current JK to 1976 All Wranglers JK, TJ, LJ, YJ, CJ7 & CJ5 Stainless Steel
117-124 Current JK to 1976 All Wranglers JK, TJ, LJ, YJ, CJ7 & CJ5 Texture Black
120-Rocker Guards
Side Protection. The toughest rocker guards available to protect your Jeep’s side panels. A full ¼” of solid steel protects both the side and undercarriage of your Jeep’s valuable side panels. Heavy duty ½” acorn nuts provide a smooth round surface to glide over the roughest off road terrain. Provides the perfect location for using a Hi-Lift™ Jack. No drilling required--easily bolts onto Wrangler 1997-2006 and JK 2007 to current model without drilling a single hole or trimming your plastic fender covers. Comes in your choice of high gloss black or texture black powder coated finishes.
120-174 2007 to current Wrangler JK 4 door Texture Black™
120-171 2007 to current Wrangler JK 4 door High Gloss Black
120-164 2007 to current Wrangler JK 2 door Texture Black™
120-161 2007 to current Wrangler JK 2 door High Gloss Black
120-124 1997-2006 Wrangler TJ Texture Black™
120-121 1997-2006 Wrangler TJ High Gloss Black
121-A/T Slider Rock Rails for Wrangler TJ & LJ 1997-2006
Side protection. The toughest rocker guards combined with the additional protection of 1 ½” x .120” heavy wall round steel tubing that offers superior side body protection. The rails which are welded on at a 45 degree angle provide perfect body protection when your vehicle is off camber in the off road environment. Provides the perfect location for using a Hi-Lift™ Jack. No drilling required, easily bolts onto Wrangler TJ 1997-2006 . Comes in your choice of high gloss black or texture black powder coated finishes.
121-121 1997-2006 Wrangler TJ High Gloss Black
121-124 1997-2006 Wrangler TJ Texture Black
127-Rocker Guards Wrangler TJ 1997-2006
Side protection. The rocker guards protect your Jeep’s side panels. Wrangler TJ 1997-2006 made from 1/8” steel, protects the edge of your Jeep’s valuable side panels, drilling required.
No trimming of molded fender covers required. Comes in your choice of high gloss black or texture black powder coated finishes.
127-121 1997-2006 Wrangler TJ High Gloss Black
127-124 1997-2006 Wrangler TJ Texture Black
131-Safari Doors
Tube Doors. The original patented tubular doors for your Wrangler. Buy the original, buy the best, don’t accept cheap imitation copies that cost more than the Olympics original Safari Doors™. Leave your full doors at home and install these for the sense of freedom of going door-less. Designed to enhance your off-road experience by increasing your visibility for easier technical maneuvering. Safari Doors provide a place to rest your arm. Installs without drilling. Comes in your choice of high gloss black or texture black powder coated finishes.
Wrangler JK 4 door application comes with all four doors, in one package. No need to order front and rear doors separately.
Options sold separately: Install 117-Safari Mirrors.135-Arm Pads.
131-174 2007 to current Wrangler JK 4 door Texture Black
131-171 2007 to current Wrangler JK 4 door High Gloss Black
131-164 2007 to current Wrangler JK 2 door Texture Black
131-161 2007 to current Wrangler JK 2 door High Gloss Black
131-124 1997-2006 Wrangler TJ & LJ Texture Black
131-121 1997-2006 Wrangler TJ & LJ High Gloss Black
131-114 1976-1995 Wrangler YJ & CJ-7 Texture Black
131-111 1976-1995 Wrangler YJ & CJ-7 High Gloss Black
132- Safari Doors ll for Wrangler JK 2007 to current
Tube Doors. For unique off road styling we have added a tubular serpentine shape that fits within the door tube frame.
132-174 2007 to current Wrangler JK 4 door Texture Black
132-171 2007 to current Wrangler JK 4 door High Gloss Black
132-164 2007 to current Wrangler JK 2 door Texture Black
132-161 2007 to current Wrangler JK 2 door High Gloss Black
Options sold separately: Install 117-Safari Mirrors.135-Arm Pads., 136 V Bag and 137 Extinguisher Bag
136-174 V Bags
Add the convenience of a storage bag for your first aid kit, glasses, cell phone or your personal meds. Black only, sold individually fits all 132-Safari Victory Doors.
137-174 Fire Extinguisher bag
Don't put your fire extinguisher in the back, because when you need it you need it NOW!
Straps right onto your tube door, can be installed any where you want it.
135-Arm Pad
Tube Door Accessories. The perfect addition to your Safari Doors, easily installs without any tools thanks to the Velcro sewed into the highly durable upholstery. Interior installation pads provide a comfortable place to rest your arm on long drives and to balance your weight when traversing off road terrain. Sold a pair per package. For four door order two 135-115.
135-115 Fits all Safari Doors Wrangler; JK,TJ, LJ, YJ & CJ7 Black
153-A/T Slider Rear Bumper
Tube Bumper for Wrangler. Built for serious rock climbing competitors. Protects both rear end and rear quarter panels with the protection of 1 ½ ” x .120” heavy wall round steel tubing. No drilling required, easily bolts onto all Wranglers and Unlimited Jeeps. Includes fully functional Class II receiver hitch with 250 pound tongue weight and 2,500 load capacity. The receiver hitch is engineered so you can easily slide in trailer ball mount inserts and accessories such as and bike racks without modification of accessories. Comes in two powder coated finishes, your choice of two powder coated finishes, high gloss black and texture Texture Black.
153-121 1988-2006 All Wranglers & Unlimited High Gloss Black
153-124 1988-2006 All Wranglers & Unlimited Texture Black
171-A/T Slider Reverse Bars
Side Protection. No drilling required, easily bolts on. Protect your side rocker panels with heavy wall steel tube. Double tube design protects rocker panels and the side of the Jeep’s body. Install in up position to provide body side protection when off camber in off road environments. Install down to use as a step for easier exit and entrance into the vehicle. Provides ¼” of steel between your Jeep and anything you come up against. Easily bolts on, no drilling required. Available in your choice of two high quality powder coated finishes. High Gloss Black and Texture Black
171-121 2007 to current Wrangler TJ & YJ High Gloss Black
171-124 2007 to current Wrangler TJ & YJ Texture Black
172-A/T Slider Front Bumper with Hood Protection
Tube Bumper. Add serious custom off road styling and front end protection. For extreme approach and departure angles without tire interference. No drilling required--easily bolts onto Wranglers. Engineered for maximum bumper clearance required by serious rock climbing competitors. This bumper protects your fenders, head lights, front grill, radiator and a winch of your choice. Manufactured from 1 ½” x .120” heavy wall steel tubing, provides a 1/4” of steel protection between your Jeep and any obstacle you encounter. . Comes in two powder coated finishes. Winch and winch mounting plate not included.
172-121 1988-2006 All Wranglers & Unlimited High Gloss Black
172-124 1988-2006 All Wranglers & Unlimited Texture Black™
174-A/T Slider Front Bumper
Tube Bumper. Add serious custom off road styling and front end protection. No drilling required--easily bolts onto Wranglers. Engineered for maximum bumper clearance required by serious rock climbing competitors. For extreme approach and departure angles without tire interference. This bumper protects your fenders and winch of your choice. Manufactured from 1 ½” x .120” heavy wall steel tubing, provides a 1/4” of steel protection between your Jeep and any obstacle you encounter. Comes in your choice of two powder coated finishes, High Gloss Black and Texture Black. Winch not included.
174-121 1988-2006 All Wranglers & Unlimited High Gloss Black
174-124 1988-2006 All Wranglers & Unlimited Texture Black
177 Jack Mounting Brackets
Jack Mount. Easily bolt your Hi Lift Jack to your front bumper. Installs without drilling on custom Wrangler JK Bumpers that have exposed bolts on face of bumper. Can be installed on Wrangler TJ, YJ and CJ's by simply drilling holes in the face of the bumper. Provides quick and easy access to your Hi Lift jack .
177-171 1955-current Wrangler JK, TJ, LJ, YJ and CJ's High Gloss Black
177-174 1955-current Wrangler JK, TJ, LJ, YJ and CJ's Texture Black
180 Auxiliary Bar
Light Bar. These versatile mounting bars can be used to mount auxiliary lights, Hi-Lift™ jacks and numerous other types of off-road gear. Olympic provides three auxiliary mounting tabs. Use center bracket to securely lock your Hi Lift jack in place. Bolts into existing bumper mounting holes--no drilling required on 1997-2006 model Wranglers and does not interfere with tow hooks. Older model Wranglers require drilling to install. Made from 1 ½” x .065” wall round steel tubing, easily mounts to pre-existing mounting holes. Comes in two powder coated finishes, your choice of two powder coated finishes, high gloss black and texture Texture Black.
180-121 1997-2006 Wranglers & Unlimited High Gloss Black
180-124 1997-2006 Wranglers & Unlimited Texture Black™
182-Auxiliary Light Mounting Bracket.
Light Bracket. Improve night driving vision when four wheeling. Easily install auxiliary lights to your front bumper. Mounting brackets install without drilling on custom Wrangler JK Bumpers that have exposed bolts on face of bumper. Can be installed on Wrangler TJ, YJ and CJ's by simply drilling holes in the face of the bumper.
182-171 1955- to current Wrangler JK, TJ, LJ, YJ and CJ's High Gloss Black
182-174 1955- to current Wrangler JK, TJ, LJ, YJ and CJ's Texture Texture Black T.M.
187 Jacklite
Light Bracket, Jack Mounting Bracket. Easily bolt your Hi Lift Jack and a set of Auxiliary lights to your front bumper. Improve night driving vision when four wheeling. Provides quick and easy access to your Hi Lift jack. Easily install two auxiliary lights to your front bumper. If you are not installing a Hi Lift Jack you can install four Auxiliary lights. Installs without drilling on custom Wrangler JK Bumpers that have exposed bolts on face of bumper. Can be installed on Wrangler TJ, YJ and CJ's by simply drilling holes in the face of the bumper.
187-171 1955-to current Wrangler JK, TJ, LJ, YJ and CJ's High Gloss Black™
187-174 1955-to current Wrangler JK, TJ, LJ, YJ and CJ's Texture Black
205-Entry Guard
Step, Entry Step, Exit Step. Olympic was the first to introduce Entry Guards in the 1970's to protect your Jeep door sill. Olympic Entry Guards are engineered to easily install without drilling, using high tech 3M™ double sided adhesive tape used by NASA. The Stainless Entry Guards have a satin finish which hides scratches. Also available in Texture Black powder coated finish.
205-122 1997-2006 Wrangler TJ Stainless Steel
205-124 1997-2006 Wrangler TJ Texture Black™
205-112 1976-1995 Wrangler YJ & CJ-7 Stainless Steel
205-114 1976-1995 Wrangler YJ & CJ-7 Texture Black™
221-Rock Rails for Wrangler JK 2007 to current 2 door & 4 door
Side Protection. The toughest rocker guards combined with the additional protection of 2” x .120” heavy wall round steel tubing that offers superior side body protection. The rails are welded on at a 45 degree angle to provide body protection when your vehicle is off camber in the off road environment. Provides the perfect location for using a Hi-Lift™ Jack. No drilling required-- easily bolts onto Wrangler JK 2007 to current model without drilling a single hole or trimming your plastic fender covers. Your choice of two powder coated finishes, High Gloss Black and Texture Black.
221-161 2007 to current Wrangler JK 2 door High Gloss Black™
221-164 2007 to current Wrangler JK 2 door Texture Black™
221-171 2007 to current Wrangler JK 4 door High Gloss Black™
221-174 2007 to current Wrangler JK 4 door Texture Black™
230-Boa Basic Bumper
Front End Protection, Grill Guard,Tube Bumper, JK Bumper. Wrangler Bumper. Engineered to easily bolt on for style and protection. The Boa Basic Bumper's unique tubular design provides excellent front end protection with 1/4” of steel protection between your Jeep and any obstacle you come up against. Boa Basic Bumper includes mounting positions for O.E.M. fog lights and winch roller fair lead or Haus. Comes in two powder coated finishes, high gloss black and texture Texture Black.
Options: For additional grill protection order a 264-17X Front Bumper Stinger, Manufactured from 2” round heavy wall steel tubing sold separately. To install a winch order Olympics’ recessed winch mount 507-174. When installing Boa with a winch, to also install your o.e.m. fog lights order Olympics Light Box pt. 852-17X. To add a D Ring, you have a choice of installing pt.344-17X or pt.341-17X if you are also installing a 264-17X Front Bumper Stinger
Note: You can install other manufacturer’s top frame winch mounts on the Boa Bumper.
230-171 2007 to current Wrangler JK 2 & 4 door High Gloss Black
230-174 2007 to current Wrangler JK 2 & 4 door Texture Black
251-Boa Extreme Rear Bumper
Tube Bumper, JK Bumper. Wrangler Bumper. Engineered to easily bolt on without interfering with O.E.M. style 2” receiver hitch. Boa Extreme rear bumper is design to protect the rear corner rockers as they completely wrap around the corner panels. Manufactured from 2” round heavy wall steel tubing, provides protection between your Jeep and any obstacle you come up against. Available in two powder coated finishes.
Options: Add a Tuff n EZ Tire Carrier order pt. 725-17X .Need a receiver hitch, order Olympics part number 333-174.
251-171 2007 to current Wrangler JK 2 & 4 door High Gloss Black
251-174 2007 to current Wrangler JK 2 & 4 door Texture Black
257-Boa Extreme Rear Bumper with Tuff n EZ Tire Carrier included.
Tube Bumper, JK Bumper. Wrangler Bumper. Engineered to easily bolt on without interfering with O.E.M. style 2” receiver hitch. Boa Extreme rear bumper is design to protect the rear corner rockers as they completely wrap around the corner panels. When using 2517-17X ordering number you receive the 251-Boa Extreme Bumper and the 725- Tuff n EZ Tire Carrier. Manufactured from 2” round heavy wall steel tubing, provides protection between your Jeep and any obstacle you come up against. Available in two powder coated finishes.
Options: Need a receiver hitch, order Olympics part number 333-174.
257-171 2007 to current Wrangler JK 2 & 4 door High Gloss Black
257-174 2007 to current Wrangler JK 2 & 4 door Texture Black
253-Wrecker Bumper
Tow Bumper, protects and strengthens rear cross member, includes 2” receiver hitch and heavy duty tow hook mounting brackets. Manufactured from heavy duty 2” x 3” rectangular tubing with 60 degree slanted ends for easy deflection of rocks and off road hazards. Comes in two powder coated finishes.
253-121 1997-2006 Wrangler & Unlimited High Gloss Black
253-124 1997-2006 Wrangler & Unlimited Texture Black
260- Maxi Stinger
Front End Protection, Grill Guard, Winch Protection with maximum strength and style and for your Jeep. Engineered to easily bolt on to any Olympic Rock Bumper, the Original Jeep Bumper, and other manufacturer’s bumpers with standard original profile. Bolts onto 8 existing mounting holes on your Wrangler TJ 1997- 2006, also fits the Wrangler YJ 1987-1995. Manufactured from 2” round x .120” heavy wall steel tubing. Protects winch, front grill, head lights and hood. This is for the Extreme off roader and the family four wheeler that no one would not dare to cut off on the freeway. In case of a roll over, the front nose of the Stinger will protect the hood, front grill and radiator from damage. Having the 260 Bolt on Stinger can be the difference from your Jeep doing a front end roll over and providing you with that split second delay giving your rear tires the time to come back to earth and driving out of a very scary situation. Comes in two powder coated finishes.
260-121 1987-2006 Wrangler TJ, YJ & Unlimited High Gloss Black
260-124 1987-2006 Wrangler TJ, YJ & Unlimited Texture Black
262-17X Rescue Gorilla Guard
Front End Protection, Grill Guard, Winch Protection for your Wrangler JK's radiator, grill, headlight and front grill with roll over damage. This bad boy is for the extreme off roader. It requires Olympic 517 or 567 Rescue Bumper and 564 Bumper End Caps. It bolts on with six 1/2” bolts. Manufactured from 2” round x .120” heavy wall steel tubing. Each tube provides a 1/4” of steel protection between you and anything your jeep comes up against.
262-171 2007 To current Wrangler JK High Gloss Black
262-174 2007 To current Wrangler JK Texture Black
264- Front Bumper Bar
Front End Protection, Grill Guard, Winch Protection. Protects front bumper and front grille, fits with all winch brands. Comes with auxiliary mounting brackets for lights and a Hi Lift Jack™.
Wrangler JK 2007 to current the 264 fits ONLY with Olympic’s series of Rock and Rescue Bumpers and Boa bumpers.
For Wrangler TJ and Unlimited 1997-2006 easily bolts on without drilling to either O.E.M. bumper or Olympic’s heavy duty Rock Bumpers. 264-12_ is uniquely engineered with optional fastening location for hardcore use, which requires additional minimal drilling. Comes in two powder coated finishes.
264-121 1997-2006 Wrangler TJ & Unlimited High Gloss Black
264-124 1997-2006 Wrangler TJ & Unlimited Texture Black
264-171 2007 to current Wrangler JK 2 & 4 door High Gloss Black
264-174 2007 to current Wrangler JK 2 & 4 door Texture Black
271-Slider Bars
For Wrangler JK and Cherokee XJ
Side Protection, Nerf Bar, Step that protect your Jeeps side panels with heavy wall steel tube. Double tube design protects both the lower rocker panel and the side of the Jeep’s body..
Provides ¼” of steel between your Jeep and anything you come up against. Includes heavy duty stanchion between tubes for extra strength. Easily bolts on, no drilling required on Wranglers. The four door model Wrangler JK 2007 to current can be reversed to be used as a step for easier exit and entrance into the vehicle or reversed and used for maximum side body protection when four wheeling. Available in your choice of two high quality powder coated finishes. Does not bolt on with Wrangler JK Rubicon Edition O.E.M rocker panel guards.
271-171 2007 to current Wrangler JK 4 door High Gloss Black
271-174 2007 to current Wrangler JK 4 door Texture Black
271-161 2007 to current Wrangler JK 2 door High Gloss Black
271-164 2007 to current Wrangler JK 2 door Texture Black
271-151 1988-2000 Cherokee XJ High Gloss Black
271-154 1988-2000 Cherokee XJ Texture Black
272- Boa Extreme Front Bumper
Front End Protection, Grill Guard, Winch Protection. Tube Bumper, that adds a real sense of unique style and engineering to your Wrangler JK. Boa Extreme includes mounting positions for O.E.M. fog lights and winch roller fair lead or Haus. Manufactured from 2” round heavy wall steel tubing. Comes in two powder coated finishes, high gloss black and texture Texture Black. Engineered to easily bolt on.
Options: To install a winch order Olympics’ recessed winch mount 507-174. When installing Boa Extreme with a winch to also install your o.e.m. fog lights order Olympics Light Box pt. 852-17X. To add a D Ring, you have a choice of 344-17X or the 341-17X
272-171 2007 to current Wrangler JK 2 & 4 door High Gloss Black
272-174 2007 to current Wrangler JK 2 & 4 door Texture Black
273-Boa Bumper
Front End Protection, Grill Guard, Winch Protection, Tube Bumper. The Boa Bumper unique style tubular design providing excellent front end protection providing a 1/4” of steel protection between your Jeep and any obstacle you come up against. This Boa adds the traditional top center hoop providing a clean front end and grill protection. Boa Bumper includes mounting positions for O.E.M. auxiliary lights and winch roller fair lead or haus. Comes in two powder coated finishes, high gloss black and texture Texture Black. Engineered to easily bolt on.
Options: For additional grill protection order a 264-17X Front Bumper Stinger, Manufactured from 2” round heavy wall steel tubing sold separately. To install a winch order Olympics’ recessed winch mount 507-174. When installing Boa with a winch, to also install your o.e.m. fog lights order Olympics Light Box pt. 852-17X. To add a D Ring, you have a choice of 344-17X or the 341-17X if you are also installing a 264-17X.
273-171 2007 to current Wrangler JK 2 & 4 door High Gloss Black
273-174 2007 to current Wrangler JK 2 & 4 door Texture Black
300 Series Maxi Bumpers
For maximum protection and classic off road styling. Manufactured from heavy wall 3” diameter steel tubing to protect your Jeep. Front and Rear Maxi Bumpers easily bolt on without drilling. Installation of Side Bars requires drilling. Comes in two powder coated finishes, high gloss black and texture Texture Black.
Maxi Rear Bumper , included class 2 receiver tow hitch
353-121 1997-2006 Wrangler TJ & LJ High Gloss Black
353-124 1997-2006 Wrangler TJ & LJ Texture Black
353-111 1988-1995 Wrangler YJ High Gloss Black
353-114 1988-1995 Wrangler YJ Texture Black
353-101 1976-1987 CJ-5 & CJ-7 High Gloss Black
353-104 1976-1987 CJ-5 & CJ-7 Texture Black
Maxi Side Bars
370-121 1997-2006 Wrangler TJ & LJ High Gloss Black
370-124 1997-2006 Wrangler TJ & LJ Texture Black
370-111 1976-1995 Wrangler YJ & CJ-7 High Gloss Black
370-114 1976-1995 Wrangler YJ & CJ-7 Texture Black
Maxi Front Bumper, with center hoop for extra protection.
372-121 1997-2006 Wrangler TJ & LJ High Gloss Black
372-124 1997-2006 Wrangler TJ & LJ Texture Black
372-111 1976-1995 Wrangler YJ & CJ's High Gloss Black
372-114 1976-1995 Wrangler YJ & CJ's Texture Black
333- Receiver Hitch for Wrangler JK
Heavy Duty hitch made from 1/4” solid steel plate, easily bolts into existing mounting holes in the Jeep’s rear cross member. It is a Class II rated hitch with a capacity of up to 3,500 pounds. It is engineered to install with or without an Olympic bumper.
333-174 2007to current Wrangler JK Only in Texture Black
341-17X D Ring Shackle Mounts for Wrangler JK
Specialty D Ring Shackle mount for all Olympic Boa, Rock and Rescue Bumpers . Fits with any Wrangler Jk bumper which has exposed front face mounting bolts.
341-171 1955-to current Wrangler JK, TJ, LJ, YJ and CJ's High Gloss Black
341-174 1955-to current Wrangler JK, TJ, LJ, YJ and CJ's Texture Black
341-404 Universal D Ring Shackle Mounts; for Wrangler TJ, YJ & CJ with Olympic Rock Bumpers and other manufacture bumpers, can also be used on JK's
We have added a 1/4” thick X 2” wide support plate you place on the inside of the earlier model Wranglers and CJ, that require you to drill two 1/2” bolt thru the face of the bumper, than place the 1/2” grade 8 bolt thru the bracket install it flush against the inside of the bumper reinforcing the bumper and fasten the bolts into the 341 D ring shackles.
344 D. Ring Mounting Brackets
344-171 1955-current Wrangler JK, TJ, LJ, YJ and CJ's High Gloss Black
344-174 1955-current Wrangler JK, TJ, LJ, YJ and CJ's Texture Black
371-Extreme Reverse Bar
Extreme Bars come with three lateral bars and vertical stanchions between outside impact bar and center lateral bar for extra strength. Can easily be reversed from up to down position by simply removing security bolt and sliding off mounting system. Use up position to protect Jeep’s side panels when off roading, while down position can be used as a step for easy entry and exit of vehicle. Manufactured with 1 ½” diameter extreme heavy wall steel tubing, provides protection between any obstacle and your Jeep. Easily bolts on without drilling. Comes in two powder coated finishes.
371-121 1997-2006 Wrangler TJ High Gloss Black
371-124 1997-2006 Wrangler TJ Texture Black
371-131 2004-2006 Unlimited LJ High Gloss Black
371-134 2004-2006 Unlimited LJ Texture Black
500 Series Rock Bumpers
Unique gull wing Rock Bumper design increases tire clearance. Engineered for serious off road adventures, built to take a beating and protect your Jeep’s body and frame. Olympics energy absorption design deflects the pressure of impact from the bumper to the vehicle frame. Manufactured from 3/16 inch steel plate. Welded ends for extra strength. Comes in 50” and 57” lengths, with or without a 2” receiver. The 2” receiver on the front of the bumper is an excellent multi purpose feature, simple insert a recovery strap in the receiver and secure strap in place with a clevis pin. The perfect solution for positioning a boat trailer when recovering or putting a boat in the water.
The Rock Bumper easily instals without drilling as it bolts into exisitng mounting holes on the jeep frame. Available in two powder coated finishes.
The 2007 and newer Wrangler JK two and four door rear Rock Bumper is engineered to bolt on without interfering with the O.E.M. receiver hitch, if you have a JK without a receiver hitch you can order Olympics’ part number 333-174 sold separately. To add D Ring Shackle to your Rock bumper order 341-17_ for Jk's, 341-404 for TJ, YJ and CJ.
Front Rock Bumpers, lengths
Wrangler JK 2007 to current
JK Front rock bumpers are 54” long
JK Rear rock bumpers are xxx” long
Wrangler TJ, YJ, CJ7 & CJ5 1955-2006
505-Rock Front Bumper 50” length
530-Rock Front Bumper 57” length
533-Rock Front Bumper 57” length with 2” Receiver Hitch
543-Rock Front Bumper 50” length with 2” Receiver Hitch
550-Rock Rear Bumper 57” length
553-Rock Rear Bumper 57” length with 2” Receiver Hitch
Front Rock Bumpers, application numbers
Wrangler JK
530-171 2007 to current Wrangler JK two & four door High Gloss Black
530-171 2007 to current Wrangler JK two & four door texture Black
Wrangler JK front bumpers with 2” receiver;
533-171 2007 to current Wrangler JK two & four door High Gloss Black
533-171 2007 to current Wrangler JK two & four door texture Black
Front Wrangler TJ,YJ & CJ's
505-121 1942-2006 Wrangler TJ, YJ; CJ-7, CJ-5 High Gloss Black
505-124 1942-2006 Wrangler TJ, YJ; CJ-7, CJ-5 Texture Black
530-121 1955-2006 Wrangler TJ, YJ; CJ-7, CJ-5 High Gloss Black
530-124 1955-2006 Wrangler TJ, YJ; CJ-7, CJ-5 Texture Black
Front Bumpers with 2” receiver;
533-121 1955-2006 Wrangler TJ, YJ; CJ-7, CJ-5 High Gloss Black
533-124 1955-2006 Wrangler TJ, YJ; CJ-7, CJ-5 Texture Black
543-121 1942-2006 Wrangler TJ, YJ, CJ-7, CJ-5 High Gloss Black
543-124 1942-2006 Wrangler TJ, YJ, CJ-7, CJ-5 Texture Black
Rear Rock Bumpers
Rear Wrangler JK
550-171 2007 to current Wrangler JK two & four door High Gloss Black
550-171 2007 to current Wrangler JK two & four door texture Black
2” receiver sold separately if required 333-174
Rear Wrangler TJ, YJ 7 CJ 1977-2005
550-121 1997-2006 Wrangler TJ High Gloss Black
550-124 1997-2006 Wrangler TJ Texture Black
550-111 1988-1995 Wrangler YJ High Gloss Black
550-114 1988-1995 Wrangler YJ Texture Black
550-101 1977-1987 CJ-5 & CJ-7 High Gloss Black
550-104 1977-1987 CJ-5 & CJ-7 Texture Black
Rear Bumper with 2” Receiver
553-121 1997-2006 Wrangler TJ High Gloss Black
553-124 1997-2006 Wrangler TJ Texture Black
553-111 1988-1995 Wrangler YJ High Gloss Black
553-114 1988-1995 Wrangler YJ Texture Black
553-101 1977-1987 CJ-5 & CJ-7 High Gloss Black
553-104 1977-1987 CJ-5 & CJ-7 Texture Black
507-174 Recessed Winch Mount
Engineered to fit down and inside of Wrangler JK front frame horns. Providing the strongest mounting position for your winch. Manufactured from heavy duty ¼” steel plate. Easily bolts on without any drilling or welding required. Mile Marker, Super Winch, Ramsey and Warn winches bolt right in.
507-Winch Mount fits with; 230 Boa Basic, 272 Boa Extreme, 273-Boa Bumpers.
507-174 2007-2011 Wrangler JK 2 & 4 door Only in Texture Black
508-Top Frame Winch Mount
Engineered to easily mount on top of your JK frame for use with Olympics 500 Series Rock Bumpers and a variety of front end guards.
508-171 2007 to current Wrangler JK 2 & 4 door High Gloss Black
508-174 2007 to current Wrangler JK 2 & 4 door Textured Black
517-Rescue Bumper
For the most serious off road enthusiast. Built to rugged and stream line standards for extreme vehicle tire clearance. You can choose from 1/4” or 1/8” thick steel plate. directly wraps around the vehicle chassis reenforcing it by the strongest frame ever built for a Jeep. The Rescue bumper comes with the 1/4” thick 507 Recessed Winch mount included.
Rescue Bumper made with 1/4” thick steel
517-171 2007 to current Wrangler JK 2 & 4 door High Gloss Black
517-174 2007 to current Wrangler JK 2 & 4 door Texture Black
Rescue Bumper made with 1/8” thick steel
567-171 2007 to current Wrangler JK 2 & 4 door High Gloss Black
567-174 2007 to current Wrangler JK 2 & 4 door Texture Black
Options: Include a variety of axillary mounting brackets for jacks, lights, D Ring Mounts and your choice of three tubular bumper and hood guards. Manufactured from 2” round heavy wall steel tubing sold separately.
177-17X Hi Lift Jack Mounting Brackets
182-17X Auxiliary Light Mount Brackets
187-17X Combination Hi Lift Jack and Auxiliary Light Mounting Brackets
262-17X Rescue Gorilla Guard, protects bumper, winch, front grill and radiator.
264-17X Front Bumper Stinger, protects bumper, winch and front grill.
341-174 D Ring Shackle Mounts
344-174 D Ring Shackle Mounting Plates
512-174 Winch Guard, protects winch and front grill.
518-17X Smuggler Side Boxes, bolt to the sides of the 517-Rescue Bumper.
610-17X Front End Guard
852-17X Olympic Light Boxes
To install a winch and your o.e.m. fog lights order Olympics Light Boxes pt. 852-17X.
Smuggler Box’s and Smuggler Bumpers are trade marks of Olympic 4X4 Products a division of, Olympic Plating and Polishing Works, Incorporated.
5360-Smuggler Front Bumper
Application: 2007 and Newer Wrangler JK , 4 and 2 door Jeeps.
Smuggler Bumpers built to protect your vehicle from on and off road hazards. Deflective edges for ascending and descending approach angles. Strong durable steel construction, includes steel storage box’s to securely lock your gear. Stow your Winch accessories, ie? Cable, Gloves, Recovery Strap, Tree strap, Snatch block, D rings, Jumper Cables and misc tools. This bumper also includes the recessed 507 Winch Mount that sits inside the frame below the top of the vehicle frame minimizing interference of air flow to radiator, allowing your radiator to operate at efficient cooling temperatures. Winch sits inside bumper protecting it from off road hazards.
5360-171 2007 to current Wrangler JK 2 & 4 door High Gloss Black
5360-174 2007 to current Wrangler JK 2 & 4 door Texture Black
Options: Include a variety of axillary mounting brackets for jacks, lights, D Ring Mounts and your choice of three tubular bumper and hood guards. Manufactured from 2” round heavy wall steel tubing sold separately.
177-17X Hi Lift Jack Mounting Brackets
182-17X Auxiliary Light Mount Brackets
187-17X Combination Hi Lift Jack and Auxiliary Light Mounting Brackets
264-17X Front Bumper Stinger, protects bumper, winch and front grill.
344-174 D Ring Mounting Plates
512-174 Winch Guard, protects winch and front grill.
852-17X Olympic Light Boxes
To install a winch and your o.e.m. fog lights order Olympics Light Boxes pt. 852-17X. To add a D Ring mount, 344-17X or the 341-17X if you are also installing a 264-17X.
5560-Smuggler Rear Bumper Wrangler 2007 to current model. This unique custom rear bumper comes with a built in winch mount, you can easily install a low profile winch like the Warn and Mile Marker 8,000. You do not have to make any modifications to your jeep to install a bumper on the Olympic Smuggler Rear Bumper. Olympic has engineered a insert point for a Hi Lift Jack, which is lined up with the frame of the vehicle so you are lifting the vehicle up by the frame and not the bumper. There are two D Ring Mounts securely welded into place . A 2” Receiver Hitch with safety chain securely welded to the underside of the Winch plate, strengthens the winch mount and fortifies the structure of the bumper, protecting it from off road hazards.
We offer the Smuggler Bumper with two choices of specialty Tire Carriers or no tire carrier at all.
5560-Smuggler Bumper rear features a unique due directional Rear Tire Carrier that can swing both horizontal and vertical. The tire carriers extremely unique vertical ability enables the Tire Carrier to unfold in a down position placing the tire on the ground, so you can roll your tire off the tire mount instead of lifting it off. This feature is especially helpful as many tires weigh close to a hundred pounds.
5567-Smuggler Bumper comes with our Tuff n EZ Tire Carrier that mounts on the Smuggler Bumpers Spindle and attaches to the tailgate. When you open your tailgate the Tire Carrier opens in harmony with the tailgate. There is no hassling with a opening the tire carrier to get at your tailgate to get inside the rear of your jeep. Simply open the O.E.M. latch in the tailgate and everything wings opens together, in one easy motion.
556-Smuggler Bumper comes without a Tire Carrier. Note: you cannot install your spare tire on your OEM tailgate mounted Tire Mount. You will need to purchase our special hardware kit to raise your OEM tire mount up three inches or an alternative tire carrier or place your spare tire in the rear of your jeeps interior. If you decide at a later date you wish to purchase one of the two Tire Carriers Olympic offers you can.
Smuggler Bumper with Dual Directional Tire Carrier.
5560-171 High Gloss Black,
5560-174 Texture Black.
Smuggler Bumper with Tuff n EZ Tire Carrier.
5567-171 High Gloss Black,
5567-174 Texture Black.
Smuggler Bumper without a Tire Carrier.
556-171 High Gloss Black,
556-174 Texture Black.
Option: 709-174 Spare Tire Riser Hardware
Tire carriers available separately
Duo Directional Tire Carrier Sold Separately
760-171 High Gloss Black
760-174 Texture Texture Black t.m.
Tuff n EZ Tire Carrier Sold Separately
750-171 High Gloss Black
750-174 Texture Texture Black t.m.
610-Front End Guards
Protects front grill and bumper. Manufactured from 3/8” solid steel with cross bars made from 2 1/2” round heavy wall steel tubing. For added style and headlight protection we recommend adding 670 Brush Guard, sold separately.
Wrangler Jk 2007 to current model. Add classic Jeep style to your new Jeep, easily bolts onto existing mounting holes in Olympics 500 Series Rock Bumpers and Rescue Bumpers. Provides room for winch roller fair leads between lower and upper tubes includes welded in place mounting brackets for Auxiliary Lights. You can easily add 341- D Ring Shackle Mounts to your bumper with the 610 F.E.G. on your JK
Wrangler TJ, YJ & CJ 1955-2006 Easily bolts into existing mounting holes in O.E.M. bumpers, requires some drilling to install onto Olympic 500 series Rock Bumper. Pre-drilled for easy installation of tow hooks. Your choice of of two powder coated finishes
Wrangler JK
610-171 1997-2006 Wrangler TJ & LJ High Gloss Black
610-174 1997-2006 Wrangler TJ & LJ Texture Black
Wrangler TJ, YJ,CJ7 & CJ5
610-121 1997-2006 Wrangler TJ & LJ High Gloss Black
610-124 1997-2006 Wrangler TJ & LJ Texture Black
610-111 1955-1995 Wrangler YJ & CJs High Gloss Black
610-114 1955-1995 Wrangler YJ & CJs Texture Black
670-Brush Guard
Easily bolts on to 610-Front End Guard, sold separately. Adds to off road styling and protects head lights from tree branches and other off road hazards. Manufactured from heavy wall 1 ½ ” round tubing.
Wrangler JK
670-171 1997-2006 Wrangler TJ & LJ High Gloss Black
670-174 1997-2006 Wrangler TJ & LJ Texture Black
Wrangler TJ, YJ,CJ7 & CJ5
670-121 1997-2006 Wrangler TJ & LJ High Gloss Black
670-124 1997-2006 Wrangler TJ & LJ Texture Black
670-111 1955-1995 Wrangler YJ & CJs High Gloss Black
670-114 1955-1995 Wrangler YJ & CJs Texture Black
700 and 701-Tire Swing
The 700 is engineered to easily bolt onto the 500 Series Rock Rear Bumpers. The 701 easily bolts onto 153 A/T Slider Rear Bumper. Manufactured from one piece heavy wall 2 ½ ” round steel tubing which provides a clean design and extreme strength. Can carry up to a 35” spare tire. Requires removing tire carrier from Wrangler tailgate and bolting it onto Tire Swing or installing Olympic 707 Tire Mount.
700-121 1978-2006 Wrangler YJ, TJ, LJ & CJs High Gloss Black
700-124 1978-2006 Wrangler YJ, TJ, LJ & CJs Texture Black
701-121 1988-2006 Wrangler & Unlimited LJ High Gloss Black
701-124 1988-2006 Wrangler & Unlimited LJ Texture Black
Options: For extra carrying capacity use our Olympic 904 or 905 Sierra Rack. Check out our 991-Roto PacX Gas Brackets. Comes in two powder coated finishes.
707-Heavy Duty Tire Mount
708-Extended Heavy Duty Tire Mount
The O.E.M. tire mount coming apart when larger diameter spare tires are installed. Olympic’s Tire Mounts are made from ¼” steel plate. They bolt into the existing mounting holes on the Wrangler’s tailgate and into the mounting holes on the Olympic 700 and 701 Tire Swings. The 708 is recommended when larger diameter tires hit the top of the rear bumper. The 707 lowers the tire by 2” and is recommended to be used on the Olympic Tire Swing. The original Wrangler JK tire you get when you buy a new Jeep is made from pot metal an easily cracks when bumped. The Olympic solid steel Tire Mount is a direct replacement that won’t fail.
Available only in Texture Black When in use the mount is hidden inside the spare.
707-124 1978-2006 Wrangler YJ, TJ, LJ & CJs Texture Black
708-124 1978-2006 Wrangler YJ, TJ, LJ & CJs Texture Black
708-174 2007 & Newer Wrangler Jk 4 & 2 door Texture Black
711 Quick N Easy Step
Step, Entry Step, Exit Step. Rightfully named the Quick N Easy Step as it is very easy to install and remove. This is an awesome feature when four wheeling. The step makes it easy to get in and out of your jeep and it can be quickly removed when in rocky terrain. You simple reach down and lift it up, and as it lifts up it automatically releases itself from its position as a step allowing you to place inside the vehicle and removing it from potential damage from rugged off road environments. It is adjustable to fit on a wide variety of manufactures side bars and rock rails. By tighten or loosening the 1/2" nuts you can bring the tubular step up to fit under round or square tube side bars. This is a must have item for any Jeeper with a raised jeep and large tires. It is sold one step to a package so order two if you wish to install a pair. Easily instals with most manufactures Rock sails and side bars
711-401 High Gloss Black
711-404 Textured Texture Black
700 Series Tuff n EZ Tire Carriers
Olympics innovative tire carrier opens easily with the tailgate. Eliminates the hassle of struggling with releasing and opening a tire carrier to be able to open your tailgate. When you open the tailgate the Tuff n #Z Tire Carrier opens in perfect harmony with the tailgate and closes just as easily.
725 Tuff n EZ Tire Carrier for Boa Rear Bumpers for Wrangler JK 2007 to current.
753 Tuff n EZ Tire Carrier for 553 Rock Bumper for Wrangler TJ 1997-2006
756 Tuff n EZ Tire Carrier for Smuggler Bumper for Wrangler JK 2007 to current.
802 Windshield Hinge Mounting Light Brackets
Easily bolts into Windshield Hinge mounting holes. Improves off roading night vision.
Olympics unique off set light mounting holes allows you to see more of the fender and tire than other makers similar product. Olympics' 802-Light Mounting Brackets position the light for maximize drivers’ vision of the fender and tire for precise wheel positioning.
Easily bolts onto all Wrangler JK 2007 & newer, and Wrangler TJ 1997-2006.
802-171 High Gloss Black
802-174 Texture Texture Black
803-Maxi Light Bar
Olympic designed this Light Bar to hold up to Five auxiliary lights and protect your Windshield Frame by extended the side support arms slightly beyond the outside edge of the frame.
The Light bar rotates allowing jeeps that fit in garage before you installed the Olympic Light bar to continue to be housed in the garage after Light Bar and Lights are installed.
Rotating the lights down greatly limits wind noise while on the highways. It also doubles as a sun shield.
Made for 1.5" steel tube, available in your choice of two Powder coated finish.
803-171 Wrangler JK 2007 to current High Gloss Black
803-174 Wrangler JK 2007 to current Texture Texture Black
803-121 Wrangler TJ & LJ 1997-2006 High Gloss Black
803-124 Wrangler TJ & LJ 1997-2006 Texture Texture Black
852-Light Pods,
Engineered to house the original O.E.M. Wrangler JK fog lights found in the O.E.M. Jeep bumper. When replacing the original bumper easily remove fog lights and reinstall them in Olympics 852-Light Pods. Than bolt the Light Pod to the face of Olympics 230, 272, 273-Boa's Bumpers, 517 , 567 Rescue Winch Bumper and 5530-Smuggler Front Bumper.
Cargo Racks
Olympic manufactures the largest selection of cargo racks for Jeep vehicles.
The first company to receive recognition by the U.S. government for its utility racks for Jeep vehicles. Thanks to our products quality, unique engineering, design features and highly functional capabilities you can take all your sporting equipment, camping gear and much much more where ever your adventure leads you.
901-Sports Rack
The original and first cargo rack developed for a Jeep that fits over the top without requiring any holes to be put into the Jeep’s top. Works with fiberglass hard top and convertible soft top or no top at all. The Olympic patented Sports Rack’s front supports bolt onto the windshield hinges while the rear support mounting brackets bolt on between the rear tail light housings and the Jeep’s body. Requires only two 5/16” holes to be drilled. Haul your sporting gear with you (kayaks, small boats, surf boards, wind surfers, bicycles, camping equipment and what ever else you like to take on or off the road). Unfasten two front knobs and raise the top of the rack to easily remove soft or hard top. Comes in two powder coated finishes.
Weight Limit: 350 pounds on the highway, 150 pounds on the trail.
901-121 1997-2006 Wrangler TJ High Gloss Black
901-124 1997-2006 Wrangler TJ Texture Black
901-111 1976-1995 Wrangler YJ & CJ-7 High Gloss Black
901-114 1976-1995 Wrangler YJ & CJ-7 Texture Black
902-Receiver Rack Interior Basket size. 4” X15 ½”X41 ¾”
A cargo rack you can depend on, this is not the cheapo you find at the big box stores. This is built with integrity and durability in the off the road environment. Comes with Z-bar that places the bottom of the rack above the top of your bumper, which is just one of the feature that gives Olympics Receiver Racks their trail worthiness. The Z-bar extends the basket away from spare tire to accommodate large spare tires or tires mounted on a tire carrier. Your choice of two powder coated finishes.
Universal application fits all 2” receivers. Not all 2” receivers are created equal. Olympic only uses high quality USA manufactured steel. Foreign manufactured steel has different tolerances and the Z-bar may be a tight fit into inferior made products.
902-401 High Gloss Black Universal application fits all 2” receivers.
902-404 Texture Black Universal application fits all 2” receivers.
903-Deluxe Receiver Rack Interior Basket size. 4” X22 ¼”X51 ¾”
Olympics’ large capacity, dependable receiver cargo rack. Olympic Racks are built with integrity for durability off the road. Deluxe Receiver Rack comes with Z-bar that places the bottom of the rack above the top of your bumper (height depends on type and location of receiver hitch). Raising the rack above the bumper gives the Olympic Receiver Racks their trail worthiness. Z-bar places basket away from spare tire to accommodate large spare tires or tires mounted outboard on a tire swing. Olympic only uses high quality USA manufactured steel. Foreign manufactured steel has different tolerances and the Z-bar may be a tight fit into inferior made products. Your choice of three powder coated finishes.
Universal application fits all 2” receivers.
903-401 High Gloss Black Universal application fits all 2” receivers.
903-404 Texture Black Universal application fits all 2” receivers.
904 & 905-Sierra Racks
The Cargo Racks that bolt onto the rear of your Jeep Wrangler JK, TJ, YJ or CJ without drilling a single mounting hole. By placing cargo rack in the enter of your spare instead of above it, you do not loose visual view above the spare. Simple remove your spare tire, place unique Olympic engineered mounting bracket over lug bolts and refasten the spare tire in place. You can now slip the rack on and off as you desire. Weight capacity on Jeep tailgate is 50 pounds, weight capacity when installed on a quality tire carrier like the 700 Olympic Tire Swing is 250 pounds on the highway and 125 pounds on the trail.
904-Sierra Rack Interior Basket size. 4” X 15 ½” X 41 ¾”
904-401 Sierra Rack 4”x17”x42” JK,TJ,YJ & CJs High Gloss Black
904-404 Sierra Rack 4”x17”x42” JK,TJ,YJ & CJs Texture Black
905-Sierra Rack ll Interior Basket size. 4” X 19” X 19”
905-401 Sierra Rack ll JK,TJ,YJ & CJs High Gloss Black
905-404 Sierra Rack ll JK,TJ,YJ & CJs Rubicon (textured) Black™
907-Mountaineer Rack
For Wrangler JK,TJ, YJ, CJ's and Cherokee XJ,
This Cargo Rack enhances storage, creates a security storage compartment and improves passenger safety. By dividing the storage space behind the rear seat it doubles your cargo area. When camping and four wheeling, install heavy items (ice chest and tools) below the rack and sleeping bags and clothes on top of rack. Wrangler JK & TJ installs without drilling, mounting brackets bolt to the roll bar above tonneau cover. Earlier model Wranglers YJ 1987-1995 and CJs 1955-1986 require four 5/16” holes to be drilled into the rear wheel well. Cherokee XJ requires drilling four ½” holes into floor board. Wrangler JK two door requires removal of rear passenger seat. On some model Wranglers it is required to trim the roll bar padding. Your choice of two powder coated finishes.
907-171 2007 to current Wrangler JK 4 door High Gloss Black
907-174 2007 to current Wrangler JK 4 door Texture Black
907-161 2007 to current Wrangler JK 2 door High Gloss Black
907-164 2007 to current Wrangler JK 2 door Texture Black
907-151 1984-2001 Cherokee XJ High Gloss Black
907-154 1984-2001 Cherokee XJ Texture Black
907-121 1997-2006 Wrangler TJ High Gloss Black
907-124 1997-2006 Wrangler TJ Texture Black
907-101 1955-1995 Wrangler YJ & CJs High Gloss Black
907-104 1955-1995 Wrangler YJ & CJs Texture Black
908-Quick N Easy Rack
This Cargo Rack, work rack can be easily installed when needed to haul kayaks, canoes, small boats, lumber or 4' X 8' sheets of plywood. When not in use it can then quickly removed and store behind the back seat. Cannot be used with soft or hard top in up position. Made from durable 1 ½” heavy wall steel tubing.
908-171 2007-current Wrangler JK 2&4 Dr. High Gloss Black
908-171 2007-current Wrangler JK 2&4 Dr. Texture Black
908-121 1997-2006 Wrangler TJ High Gloss Black
908-124 1997-2006 Wrangler TJ Texture Black
908-131 2004-2006 Wrangler LJ High Gloss Black
908-134 2004-2006 Wrangler LJ Texture Black
908-111 1992-1995 Wrangler YJ High Gloss Black
908-114 1992-1995 Wrangler YJ Texture Black
921-Dave’s Rack
The ultimate in Cargo Racks, this Rack does it all. Extra large carrying capacity Cargo Carrier and Sports Equipment hauler. You name it, we load it: bicycles, small boats, kayaks, surfboards, wind surfers, skis, fishing poles, and more. Now you have space for your camping gear, sleeping bags, stoves, tents and chairs. Rack it up and go. Life is an adventure. Take a step into Olympics' innovative future today.
You have learned to expect special products from Olympic. Now unload the rack, flip it over and watch it convert from a Cargo Rack to a Sunshade or a Rain Shelter or a Hunting or Photo Blind.
No drilling required. Where aftermarket Receiver hitches have been installed to vehicle frame, you may have to auger or drill an alternative mounting hole for Olympics frame mounting hardware.
921-121 1997-2006 Wrangler TJ High Gloss Black
921-124 1997-2006 Wrangler TJ Texture Black
921-111 1976-1995 Wrangler YJ & CJ-7 High Gloss Black
921-114 1976-1995 Wrangler YJ & CJ-7 Texture Black
991-404 Mounting system for RotopaX Spare Fuel Tank mount.
This mounting bracket system easily installs between your tire mount and spare tire and extends through the center of your wheel. A per-drilled flat mounting plate provides a mounting location to install your choice of Rotopax mounts.
