New Products

 Jeep Owners Wrangler Jk, TJ, YJ, CJ, XJ Jeeps, Scroll down this page to see a variety of new items from Olympic.

The new Tuff n EZ Tire Carrier allows you to easily open and close both the tire carrier and tailgate together in one easy motion.

Gas Tank is not part of the new Tuff n EZ Tire Carrier, Olympic sells the 991-404 Mounting Kits to mount a fuel pack to your spare tire.

5507-174 JK Rock Bumper with Tuff n EZ Tire Carrier                     2517-174 Jk Boa Extreme Bumper withTuff n EZ Tire Carrier

  

5567-174 JK Smuggler with Tuff N EZ tire carrier                         5537-123 TJ ROck Rear Bumper with Tuff n EZ Tire Carrier

Smuggler, Rock and Boa Bumpers with new Tuff n EZ Tire Carrier. 

The Tuff n EZ Tire Carrier allows you to easily open and close both the tire carrier and tailgate together in one easy motion. The super structure alignment assembly with a bronze sleeved tube control bar is engineered to bolt directly into existing mounting holes in the Wranglers tailgate. The heavy duty spindle transfers weight from the tire carrier and spare tire to the bumper and vehicle chassis, conserving your tailgate. The most commonly heard comment on the Rubicon trail during final testing and evaluating hardcore consumer’s reactions was, WOW!!! We know you will agree.

Wrangler JK 2007 to Current models, Smuggler shown above.    Wrangler TJ, TJ Unlimited (LJ) and YJ 1987 to 2006, shown above.

5567-174 Smuggler Rear Bumper with WInch Capacity                 553-124 Rock Rear Bumper shown with 753-124 Tuff n EZ Tire Carrier

includes Tuff n EZ Tire Carrier                                                              You can order Rock Rear Bumper and Tire Carrier using part 5537-124

          

5507 Rock Bumper with Tuff n EZ Tire Carrier                                                2517-Boa Extreme Bumper with Tuff n EZ Tire Carrier

Fits Wrangler Jk 2 and 4 door models 2007 to current                                  Fits Wrangler Jk 2 and 4 door models 2007 to current

5507-171 Gloss Black                                                                                          2517-171 Gloss Black

5507-174 Texture Black                                                                                        2517-174 Texture Black

If you own a TJ, LJ or YJ and already own a Olympic 553-Rear Rock Bumper with Receiver Hitch you can purchase just the Tuff n EZ Tire Carrier part number 753-1 2X and by drilling holes into your bumper bolt it on.

Owners of the Olympic 250-Boa and 251-Boa Extreme Bumpers for the Wrangler Jk 2007 to current can also buy just the tire carrier part number 725-17X and bolt it on, without drilling any holes.

You can now purchase the Smuggler Bumper with either the Duo Directional Tire Carrier or the Tuff n EZ Tire carrier. Both of the tire carriers are engineered to fit on the Smugglers welded on spindle mount.

The Wrangler JK 2007 to current 550-Rock Bumper has to be purchased with a spindle at this time. To order a 550-Rock Rear Bumper with the Tuff n EZ Tire Carrier use part numbers 5507-17X. To choose your color, replace the last digit of the part number X with a 1 for high gloss black or replace the X a 4 for texture black, both finishes are  powder coated. For assistance with what part number to order for your application and bumper please e-mail info@olympic4x4producs.com

 
 
 

 803-Maxi Light Bar

  Rubicon (textured) Black 803-174 or High Gloss Black 803-171

 

*Protects windshield frame from tight canyon walls, trees and rocky terrain.
*Light bar in lower rotated position fits below the top of the Jeeps roof line allowing jeeps that fit in garage
  to continue to be housed in the garage.
*Rotating the lights down greatly limits wind noise while on the highways. It also doubles as a sun shield.
*Holds up to Five lights or antennas. Made for 1.5" steel tube, Powder coated finish.
 

807-Rear Light Bar, the first of its kind, easily installs into existing mounting holes in the Wrangler tailgate. You can install the Rear Light Bar with the original tailgate mounted tire mount. Remove the tire mount place the Rear Light Bar mounting brackets in position and re fastening the original tire mount back in place over the light bars mounting brackets. It installs as shown to fit with any manufacturers Rear Bumper and Tire Carrier combination. As this Rear Light Bar is an innovation you may see the design vary based on application and any improvements Olympic deems necessary.
Wrangler 2007 to current;  807-174 Rubicon (textured) Black   807-171 High Gloss Black

Wrangler TJ and YJ 1987 to 2006; 807-124 Rubicon (textured) Black   807-121 High Gloss Black

 

711 Quick N Easy Step, rightfully named as it is very easy to install and remove. This is an awesome feature when four wheeling. The step makes it easy to get in and out of your jeep and it can be quickly removed when in rocky terrain. You simple reach down and lift it up, and as it lifts up it automatically releases itself from its position as a step allowing you to place inside the vehicle and removing it from potential damage from rugged off road environments. It is adjustable to fit on a wide variety of manufactures side bars and rock rails. By tighten or loosening the 1/2" nuts you can bring the tubular step up to fit under round or square tube side bars. This is a must have item for any Jeeper with a raised jeep and large tires. It is sold one step to a package so order two if you wish to install a pair.

711-404 Rubicon (textured) Black   711-401 High Gloss Black

To see more and learn about the variety of new items from Olympic please scroll down.

187-Jacklite Brackets easily bolt onto any custom Wrangler JK Front Bumpers, which utilize the eight existing mounting holes in the front of the vehicles frame works. You have a choice of laying your Jack on either of its two sides and fastening it to a variety of predrilled holes in the Jacklite Brackets. You can install one pair of lights with the Jack, or two pair of lights without the jack. Sold in pair, made from ¼” thick x 2” wide solid steel plate. Power coated in your choice of High Gloss Black or Rubicon (textured) Black, also available in raw steel for welding applications To install; simply remove the hardware that hold almost all aftermarket front bumpers to the frame of the JK, place the Jacklite Brackets in place in front of the bumper and refasten the original hardware.

187-174 Rubicon (textured) Black       187-171 High Gloss Black      187-17X Raw Steel

 

344-D Ring Mounting Brackets
Fits:2007 and newer Jeep Wrangler JK’s. A necessity for every four wheeler who wishes to take their Jeep off road as inevitable you will need the assistance of a Snatch’em strap, Hi Lift Jack or a Winch. Olympics unique heavy duty design provides ¾” of steel where D Ring is inserted. This exclusive no weld design eliminates heat embrittlement. Olympics’ D Ring Mounting Brackets easily bolt to a variety of manufactures Wrangler JK Front Bumpers that utilize the eight existing mounting holes in the front of the vehicles frame works. They also install onto Olympic New 332-404 Utility Receiver Mount, which slides into any 2” receiver.
Part number to purchase a pair: 344-174 Rubicon Black    344-171 Gloss Black Part number to purchase a single unit. 342-171 Glass Black, 342-174 Rubicon Black

  

 

Fits: TJ Wranglers from 1997

to todays model JK Wrangler

 
802 Light Mounting Brackets, improves off roading night vision while limiting visually interference from the drivers view. Olympic has engineered the auxiliary light mounting position to maximize drivers’ view of the fender and tire for precise wheel positioning.  The light mounting brackets are sold in pairs and come in a choice of High Gloss Black, Rubicon (textured) Black or Raw Steel.
Fits: 1997 thru today’s current model Wrangler JK four and two door models.
802-171 Gloss Black and 802-174 Rubicon Black 802-17X Raw Steel