Our First Banner
Sign in
Close
Register Contact Us Need help?
CALL US
760-979-2088
Compare up to 4 items:
  • compare item
  • compare item
  • compare item
  • compare item
Jk Rear Winch Bumper w/ Tire Carrier for Jeep Wrangler JK & Unlimited JK 2007-2019

Jk Rear Winch Bumper w/ Tire Carrier for Jeep Wrangler JK & Unlimited JK 2007-2019

$1749.99
Reg: $2201.72
Save: 21%

This unique innovative custom bumper comes with a built in Winch Mount and Tire Carrier.

The heavy duty bumper has been engineered to bolt on to rear cross member and vehicle frame rails in just minutes.

When installing a winch you will need to relocate your power control box usually found on top of the winch above the cable. There is a mounting bracket welded in place to attach the power control box on the inside of the driver side of the bumper. If you do not wish to remove power control cover temporarily to bolt it in place you can use heavy tie straps to attach to the bracket that is provided.  You can choice to rewire the power control box and relocate the plug into the face of the bumper where a mounting hole is provided.

You can leave the control box as is, after you relocate it inside the bumper and attach your control cable to the power box when needed. This would require you to reach under and inside the driver side of the bumper to input control cable plug.

You can Add On and order a class two, 250 tonque weight with 2,500 pound towing capacity two inch bolt on receiver hitch part number 363-174. http://www.olympic4x4products.com/two-inch-receiver-hitch.html

We have built the Recevier Hitch to bolt on to give you the flexibility to add or remove the receiver hitch for improved ground clearance in serious off roading environments. The hitch is not included when ordering 5567-174.

Part # 53567174
Weight 150.00 lbs
Part Numbers and Finishes Available Textured Black 53567174
Jeep Model Wrangler JK & Unlimited JK
Jeep Year 2007-2019
Made In the USA
 
-
+
Quantity
Send to Friend
e-mail a friend Price Match Request

You do not have to make any modifications to your jeep to install this Bumper. One of the numerous special features of the Bumper is an insert point for a Hi Lift Jack, which is lined up with the frame of the vehicle so you are lifting the vehicle up by the frame and not the bumper. There are two D Ring Mounts securely welded into place.

The Bumper does not include a location to store your Hi Lift jack.

The Bumper comes with Tire Carrier that mounts on the Bumpers Spindle that is included and attaches to the tailgate. When you open your tailgate the Tire Carrier opens in harmony with the tailgate. There is no hassling with struggling to release the tire carrier to get at your tailgate, to get inside the rear of your jeep. Simply open the O.E.M. latch on the tailgate and everything swings opens together, in one easy motion. 

Installation: Easily bolts into existing mounting holes in Wrangler JK frame.

Product Overall Dimension: Bumper only; face 6.5”x 17” includes side wrap around ends x 72”

The Bumper does not include a location to store your Hi Lift jack.