Our First Banner
Sign in
Close
Register Contact Us Need help?
CALL US
760-979-2088
Compare up to 4 items:
  • compare item
  • compare item
  • compare item
  • compare item
Jk Rear Winch Bumper w/ Duo Directional Tire Swing for Jeep Wrangler JK & Unlimited JK 4 Door 2007-2019

Jk Rear Winch Bumper w/ Duo Directional Tire Swing for Jeep Wrangler JK & Unlimited JK 4 Door 2007-2019

$2499.95
Reg: $3500.00
Save: 29%

This is a special order custom made product, each unit can take six weeks or more.

This unique innovative custom bumper comes with a built in Winch Mount and Gen2 Tire Carrier.

The heavy duty Rear Winch Bumper has been engineered to bolt onto rear cross member and vehicle frame rails in just minutes.

When installing a winch you will need to relocate your power control box usually found on top of the winch above the cable. There is a mounting bracket welded in place to attach the power control box on the inside of the driver side of the bumper. If you do not wish to remove power control cover temporarily to bolt it in place you can use heavy tie straps to attach to the bracket that is provided.  You can choice to rewire the power control box and relocate the plug into the face of the bumper where a mounting hole is provided. 

You can leave the control box as is, after you relocate it inside the bumper and attach your control cable to the power box when needed. This would require you to reach under and inside the driver side of the bumper to input control cable plug. 

Includes a class two, 250 tonque weight with 2,500 pound towing capacity two inch bolt on receiver hitch.

We have built the Recevier Hitch to bolt on to give you the flexibility to add or remove the receiver hitch for improved ground clearance in serious off roading environment's. 

Video Presentation: https://www.youtube.com/watch?v=0jfpVmFA-yc

Part # 53560174
Weight 300.00 lbs
Part Numbers and Finishes Available Textured Black 53560174
Jeep Model Wrangler JK & Unlimited JK
Jeep Year 2007-2019
Made In the USA
 
-
+
Quantity
Send to Friend
e-mail a friend Price Match Request

The Jeep Winch Bumper for Wrangler JK Rear Bumper replacement is a unique custom rear bumper that comes with a built in Winch Mount; you can easily install a low profile winch like the Warn and Mile Marker 8,000. You do not have to make any modifications to your jeep to install the bumper. One of the numerous special features of the bumper is an insert point for a Hi Lift Jack, which is lined up with the frame of the vehicle so you are lifting the vehicle up by the frame and not the bumper. There are two D Ring Mounts securely welded into place. A two inch Receiver Hitch with safety chain securely bolts to the underside of the Winch plate. 

Does not include location to stor a Hi Lift jack.

This Bumpers part number rear includes a unique due directional Rear Tire Carrier that can swing both horizontal and vertical. The tire carriers extremely unique vertical ability enables the Tire Carrier to unfold in a down position placing the tire on the ground, so you can roll your tire off the tire mount instead of lifting it off. This feature is especially helpful as many tires weigh over a hundred pounds. 

Installation: Easily bolts into existing mounting holes in Wrangler JK frame.

Product Overall Dimension: Bumper only; face 6.5”x 17” includes side wrap around ends x 72”

Related Products: Sierra Racks; 904-174, 905-174, Spare Tire Mounting System for Roto Pax Spare Fuel Tank Mount 991-404

Jeep parts and Jeep accessories have been manufactured by Olympic for over 60 years.  “Jeep” is a trademark owned by Chrysler Group LLC and is used here only to describe the vehicles that use Olympic’s products. Olympic is the longest standing manufacturer of accessories, bumpers and utility racks for Jeep vehicles. All our products are proudly made in the United States of America, at our factory in City of Commerce, California. We strive to make quality products at the lowest possible price to give you the most value for your customizing dollars.